This series is able to do pinpoint, high accuracy measurements at locations that are difficult to reach. Measurements to corners of objects, high-voltage electricity wires and a building face survey are examples of the precision this series can offer, all with the convenience of Bluetooth wireless technology.

SPECIFICATIONS

Telescope Fully transmitting, Coaxial sighting and distance measuring optics.
	Magnification	SET330R - 30x
	Resolving power	SET330R - 3"
	Field of view	1°30" (26m/1,000m)
	Minimum focus	1.3m (4.3ft)
Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection.
	Unit H&V	Degree / Gon / Mil, selectable
	Display resolutions H&V	1 / 5", 0.2mgon/1mgon, 0.005 mil, selectable
	Accuracy (ISO12857-2 1997) H&V	SET330R - 3" (1mgon)
	Measurement mode	H:Clockwise / Counterclockwise, 0 set, Hold, angle setting, repetition V:Zenith 0°, Horizontal 0° ±90°, slope in %
	Automatic dual-axis-compensator	Range: ±3' (±55mgon), "out-of-range " warning display provided
Distance measurement Modulated visible LASER, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 2, FDA Class ll LASER)
	Maximum measuring range	A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation. B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation.
	Reflectorless *1A	SET330R - 150m (490ft.)
	With reflective sheet A	500m (1,640 ft.)
	With one AP01 prism G	SET330R - 5,000m (16,400 ft.)
	Unit	Meters / Feet / Inch, selectable
	Display resolution	0.001m (0.01 ft. / 1/8 inch)
	Reflectorless *1	±(3 + 2ppm x D)mm
	With reflective sheet	±(3 + 2ppm x D)mm
	With AP prism	±(2 + 2ppm x D)mm
	Measuring time	Every 1.3s (initial meas. 2.6 s)
	Measurement mode	Fine meas. (single/repeat/average) / Tracking
	Laser	Wavelength: 635 - 690 nm, Max. output:0.99mW
Data storage and transfer
	Internal memory	About 10,000 points
	Memory card unit*2	SET330R - Optional
	Scale factor setting	0.5 to 2.0
	Interface	Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps
	Printer output	Centronics compatible (w/ optional DOC46 printer cable)
General
	Laser-pointer function	ON (automatic off 5 minutes after operation) / OFF, selectable
	Display type	Alphanumeric/graphic dot matrix LCD (192x80 dots)
	Keyboard (15keys)	SET330R - On both faces
	Wireless keyboard	SET330R - Optional
	Plate level	SET330R - 30" / 2mm
	Circular level	10' / 2mm
	Graphic LCD level	SET330R - 3' outer circle
	Optical plummet	Image: Erect, Magnification: 3x, Minimum focus: 0.3m (0.98 ft.)
	Water and dust resistance	Conformity to class IP66 (IEC60529)
	Operating temperature	-20°C to +50°C C (-4°F to +122° F)
	Tilting / Trunnion axis height	236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish.
	Size with handle and battery	W 165xD 170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.)
	Weight with handle and battery	5.3kg (11.7lb.)
Power supply - Operating voltage: 7.2 V DC
	BDC46A detachable battery	Li-lon rechargeable battery
	Continuous use*3	About 5 hours (About 600points)
	Recharging time	Less than 2 hours with CDC61/62/64
	Battery level display	4 steps with warning message
	Automatic power cut-off	30 / 15 / 10 / 5 minutes after operation / OFF, selectable
	Resume function	ON / OFF selectable (backed up for about 1 week)

INCLUDES

	Supplied with: 2 ea. BDC46A Battery, CDC62 Quick Charger, CP7 Tubular Compass, Sunshade, Lens Cap, Plumb Bob, Tool Kit, Operator's Manual, Carrying Case
Accessories
	6441-14	SF14 Wireless Keyboard for SET230R, SET330R and SET530R
	7380-46	BDC46A Lithium Ion Battery
	7380-82	CDC62 Quick Charger for BDC46A 110VAC, Flat Prongs
	6350-32	Cable from SET/NET to 25 Pin Serial Port (DOC26)
	6350-33	Cable from SET/NET to 9 Pin Serial Port (DOC27)
	7311-23	DE25 Zenith Eyepiece
	7329-51	OF3A Solar Filter (Flip-Up Type)
	6460-01	Power Cable for SET/NET 12VDC to 6VDC w/Clips